Large head screws Ø8mm

Do you want to anchor your fence posts firmly inside the ground with pointed post anchors or on a flat post base? With these special post holder screws, you can attach wooden posts exceptionally well to post holders. The post holder screws are made of galvanized steel and are available in thicknesses 8mm. The lengths vary from 40 to 50 mm. This makes them very strong. Thanks to the extra-wide wafer head of no less than 22 mm, the screw has an enormous load-bearing capacity and a high clamping range. This creates an extraordinarily high pulling force.

The combination of properties is what makes this post screw so brilliant. The Torx 40 impression makes it possible to screw the screw into the wood exceptionally quickly. The razor-sharp cutting tip ensures that pre-drilling in softwoods is not necessary, and the coarse screw thread makes the screw turn very soon in the wood.

How do I Use the Post Holder Screw?

When you use softwood, and your post holder has a round mounting hole of 9 or 11 mm, screwing in these post screws is very easy. You place the post in the post holder and screw the screws. When you use hardwood and the steel you want to mount on wood does not have a mounting hole, a few more steps are required.

For 8 mm thick post-holder screws, use a 6.0 mm thick hardwood drill. It is essential when drilling through steel that you make sure that the screw is easy to pass through the mounting hole. This prevents damage to the screw as well as to the steel to be attached. This will usually be a post holder or a pergola connector.