





Users:
|
12
|
User age:
|
3 - 12
|
Content:
|
Climbing Rocks x 12, Ladder Rungs x 8, Rung Ends x 16, Ground Covers 1700x1900 x 2, Cat Stop™ x 2, Cat Stop™ Flowers x 40, Large Metallic Handgrips x 10, Medium Metallic Handgrips x 2, Bolt Protection Caps, Tympanums x 4, Multi Brackets x 30, Roof Construction Brackets x 8, Roof Triangles 90 x 4, Platform Clamping Plates x 3, Slide Anchor Piles x 2, Slide Brackets x 2, Solid Floor Brackets Slide x 2, Solid Floor Brackets Swing x 2, Swing Brackets x 3, Swing Connect Brackets x 2, Swing Fittings x 4, Swing Seat Set x 2, Manuals 1-4, 3D Leveller, Logo ID Plate, Hardware, Toolset, Building Tools
|
Kit:
|
3x P-Kit A, 2x P-Kit B, 1x P-Kit C, 1x S-Swing Module Start, 1x S-Swing Seat (2 pcs)
|
Hy-slide:
|
1x Green/Steel
|
Dimension:
|
11,4 x 6,8 x 3,9 m
|
Playground area:
|
13,6 x 7,5 m
|
Platform height:
|
1,5 m
|
Critical fall height:
|
1,5 m
|
Slide length:
|
3 m
|
Area:
|
117 m²
|
Timber:
|
1,93 m³
|
Weight:
|
1,014.00 kg
|
Assembly time by 2 pers.:
|
22
|
Type of surface:
|
All play equipment must be installed over an impact attenuating surface according to the standard EN 1176-1: 2008, properly prepared for use in children’s playgrounds. The following is a list of commonly used impact attenuation material: double shredded bark mulch, uniform wood chips, fine gravel, fine sand, rubber tiles, poured in place impact attenuating surfacing. For placement on grass, check local regulations.
|
Paved construction site:
|
For fixation to a paved surface (e.g. with rubber tiles) additional hardware required: e.g. chemical anchors, expanding plugs/bolts.
|
Non-paved construction site:
|
For anchoring in a non-paved surface (e.g. grass, sand) additionally required:
Anchors Set Uni: 7 sets Concrete: 470 litre (≈940 kg) |
Certification
|
All Hy-land Projects are type-approved and certified by an independent test organization, TüV Rheinland. When Hy-land Projects are built according to the instructions, then each Project complies with EN 1176 : 2008. This is the European standard for playground equipment for public / commercial use. For example for restaurants, hotels, stores, day care centres, sport clubs, camp sites and controlled community areas.
|
Inspection and maintenance
|
Hy-land projects do not need additional inspections from a test organization, not after assembly and not throughout the year. All Hy-land projects come with a checklist and logbook. You can legitimately carry out the inspections yourself, that are mandatory for public / commercial playgrounds.
|
Material information
|
Robust dimensions of pressure-treated pine - stainless steel ladder rungs - powder coated steel handgrips, roof brackets and swing brackets - triple-coated non-corrosive screws and bolts - reinforced PVC sandbox covers - polyamide bolt covers - galvanized steel swing chains - stainless steel swing hooks with nylon bearing - shock absorbing light weight EPDM polymer swing seats. All materials apply to the strictest European health and safety requirements, are weatherproof and UV-resistant.
|
Manufacturer:
|
Hy-land B.V.
|
Warranty:
|
2 years
|
Users:
|
12
|
User age:
|
3 - 12
|
Content:
|
Climbing Rocks x 12, Ladder Rungs x 8, Rung Ends x 16, Ground Covers 1700x1900 x 2, Cat Stop™ x 2, Cat Stop™ Flowers x 40, Large Metallic Handgrips x 10, Medium Metallic Handgrips x 2, Bolt Protection Caps, Tympanums x 4, Multi Brackets x 30, Roof Construction Brackets x 8, Roof Triangles 90 x 4, Platform Clamping Plates x 3, Slide Anchor Piles x 2, Slide Brackets x 2, Solid Floor Brackets Slide x 2, Solid Floor Brackets Swing x 2, Swing Brackets x 3, Swing Connect Brackets x 2, Swing Fittings x 4, Swing Seat Set x 2, Manuals 1-4, 3D Leveller, Logo ID Plate, Hardware, Toolset, Building Tools
|
Kit:
|
3x P-Kit A, 2x P-Kit B, 1x P-Kit C, 1x S-Swing Module Start, 1x S-Swing Seat (2 pcs)
|
Hy-slide:
|
1x Green/Steel
|
Dimension:
|
11,4 x 6,8 x 3,9 m
|
Playground area:
|
13,6 x 7,5 m
|
Platform height:
|
1,5 m
|
Critical fall height:
|
1,5 m
|
Slide length:
|
3 m
|
Area:
|
117 m²
|
Timber:
|
1,93 m³
|
Weight:
|
1,014.00 kg
|
Assembly time by 2 pers.:
|
22
|
Type of surface:
|
All play equipment must be installed over an impact attenuating surface according to the standard EN 1176-1: 2008, properly prepared for use in children’s playgrounds. The following is a list of commonly used impact attenuation material: double shredded bark mulch, uniform wood chips, fine gravel, fine sand, rubber tiles, poured in place impact attenuating surfacing. For placement on grass, check local regulations.
|
Paved construction site:
|
For fixation to a paved surface (e.g. with rubber tiles) additional hardware required: e.g. chemical anchors, expanding plugs/bolts.
|
Non-paved construction site:
|
For anchoring in a non-paved surface (e.g. grass, sand) additionally required:
Anchors Set Uni: 7 sets Concrete: 470 litre (≈940 kg) |
Certification
|
All Hy-land Projects are type-approved and certified by an independent test organization, TüV Rheinland. When Hy-land Projects are built according to the instructions, then each Project complies with EN 1176 : 2008. This is the European standard for playground equipment for public / commercial use. For example for restaurants, hotels, stores, day care centres, sport clubs, camp sites and controlled community areas.
|
Inspection and maintenance
|
Hy-land projects do not need additional inspections from a test organization, not after assembly and not throughout the year. All Hy-land projects come with a checklist and logbook. You can legitimately carry out the inspections yourself, that are mandatory for public / commercial playgrounds.
|
Material information
|
Robust dimensions of pressure-treated pine - stainless steel ladder rungs - powder coated steel handgrips, roof brackets and swing brackets - triple-coated non-corrosive screws and bolts - reinforced PVC sandbox covers - polyamide bolt covers - galvanized steel swing chains - stainless steel swing hooks with nylon bearing - shock absorbing light weight EPDM polymer swing seats. All materials apply to the strictest European health and safety requirements, are weatherproof and UV-resistant.
|
Manufacturer:
|
Hy-land B.V.
|
Warranty:
|
2 years
|