









Users: |
7 |
User age: |
3 - 12 |
Content: |
Climbing Rocks x 4, Ladder Rungs x 4, Rung Ends x 8, Ground Cover 1700x1900, Cat Stop™, Cat Stop™ Flowers x 20, Large Metallic Handgrips x 4, Medium Metallic Handgrips x 2, Bolt Protection Caps, Tympanums x 2, Multi Brackets x 12, Roof Construction Brackets x 4, Roof Triangles 90 x 2, Platform Clamping Plates x 3, Slide Anchor Piles x 2, Slide Brackets x 3, Solid Floor Brackets Slide x 2, Solid Floor Brackets Swing x 2, Swing Brackets x 3, Swing Connect Brackets x 2, Swing Fittings x 4, Swing Seat Set x 2, Manuals 1-4, 3D Leveller, Logo ID Plate, Hardware, Toolset, Building Tools |
Kit: |
1x P-Kit A, 1x P-Kit B, 1x P-Kit C, 1x S-Swing Module start, 1x S-Swing Seat (2 pcs) |
Hy-slide: |
1x Green/Steel |
Dimension: |
8,6 x 3 x 3,9 m |
Playground area: |
10,8 x 7,8 m |
Platform height: |
1,5 m |
Critical fall height: |
1,5 m |
Slide length: |
3 m |
Area: |
86 m² |
Timber: |
0,99 m³ |
Weight: |
540.00 kg |
Assembly time by 2 pers.: |
11 |
Type of surface: |
All play equipment must be installed over an impact attenuating surface according to the standard EN 1176-1: 2008, properly prepared for use in children’s playgrounds. The following is a list of commonly used impact attenuation material: double shredded bark mulch, uniform wood chips, fine gravel, fine sand, rubber tiles, poured in place impact attenuating surfacing. For placement on grass, check local regulations. |
Paved construction site: |
For fixation to a paved surface (e.g. with rubber tiles) additional hardware required: e.g. chemical anchors, expanding plugs/bolts. |
Non-paved construction site: |
For anchoring in a non-paved surface (e.g. grass, sand) additionally required: |
Certification |
All Hy-land Projects are type-approved and certified by an independent test organization, TüV Rheinland. When Hy-land Projects are built according to the instructions, then each Project complies with EN 1176 : 2008. This is the European standard for playground equipment for public / commercial use. For example for restaurants, hotels, stores, day care centres, sport clubs, camp sites and controlled community areas. |
Inspection and maintenance |
Hy-land projects do not need additional inspections from a test organization, not after assembly and not throughout the year. All Hy-land projects come with a checklist and logbook. You can legitimately carry out the inspections yourself, that are mandatory for public / commercial playgrounds. |
Material information |
Robust dimensions of pressure-treated pine - stainless steel ladder rungs - powder coated steel handgrips, roof brackets and swing brackets - triple-coated non-corrosive screws and bolts - reinforced PVC sandbox covers - polyamide bolt covers - galvanized steel swing chains - stainless steel swing hooks with nylon bearing - shock absorbing light weight EPDM polymer swing seats. All materials apply to the strictest European health and safety requirements, are weatherproof and UV-resistant. |
Manufacturer: |
Hy-land B.V. |
Warranty: |
2 years |
Users: |
7 |
User age: |
3 - 12 |
Content: |
Climbing Rocks x 4, Ladder Rungs x 4, Rung Ends x 8, Ground Cover 1700x1900, Cat Stop™, Cat Stop™ Flowers x 20, Large Metallic Handgrips x 4, Medium Metallic Handgrips x 2, Bolt Protection Caps, Tympanums x 2, Multi Brackets x 12, Roof Construction Brackets x 4, Roof Triangles 90 x 2, Platform Clamping Plates x 3, Slide Anchor Piles x 2, Slide Brackets x 3, Solid Floor Brackets Slide x 2, Solid Floor Brackets Swing x 2, Swing Brackets x 3, Swing Connect Brackets x 2, Swing Fittings x 4, Swing Seat Set x 2, Manuals 1-4, 3D Leveller, Logo ID Plate, Hardware, Toolset, Building Tools |
Kit: |
1x P-Kit A, 1x P-Kit B, 1x P-Kit C, 1x S-Swing Module start, 1x S-Swing Seat (2 pcs) |
Hy-slide: |
1x Green/Steel |
Dimension: |
8,6 x 3 x 3,9 m |
Playground area: |
10,8 x 7,8 m |
Platform height: |
1,5 m |
Critical fall height: |
1,5 m |
Slide length: |
3 m |
Area: |
86 m² |
Timber: |
0,99 m³ |
Weight: |
540.00 kg |
Assembly time by 2 pers.: |
11 |
Type of surface: |
All play equipment must be installed over an impact attenuating surface according to the standard EN 1176-1: 2008, properly prepared for use in children’s playgrounds. The following is a list of commonly used impact attenuation material: double shredded bark mulch, uniform wood chips, fine gravel, fine sand, rubber tiles, poured in place impact attenuating surfacing. For placement on grass, check local regulations. |
Paved construction site: |
For fixation to a paved surface (e.g. with rubber tiles) additional hardware required: e.g. chemical anchors, expanding plugs/bolts. |
Non-paved construction site: |
For anchoring in a non-paved surface (e.g. grass, sand) additionally required: |
Certification |
All Hy-land Projects are type-approved and certified by an independent test organization, TüV Rheinland. When Hy-land Projects are built according to the instructions, then each Project complies with EN 1176 : 2008. This is the European standard for playground equipment for public / commercial use. For example for restaurants, hotels, stores, day care centres, sport clubs, camp sites and controlled community areas. |
Inspection and maintenance |
Hy-land projects do not need additional inspections from a test organization, not after assembly and not throughout the year. All Hy-land projects come with a checklist and logbook. You can legitimately carry out the inspections yourself, that are mandatory for public / commercial playgrounds. |
Material information |
Robust dimensions of pressure-treated pine - stainless steel ladder rungs - powder coated steel handgrips, roof brackets and swing brackets - triple-coated non-corrosive screws and bolts - reinforced PVC sandbox covers - polyamide bolt covers - galvanized steel swing chains - stainless steel swing hooks with nylon bearing - shock absorbing light weight EPDM polymer swing seats. All materials apply to the strictest European health and safety requirements, are weatherproof and UV-resistant. |
Manufacturer: |
Hy-land B.V. |
Warranty: |
2 years |