Project 2 - Commercial Wooden Playground

Users:

4

User age:

3 - 12

Content:

Ladder Rungs x 4, Rung Ends x 8, Ground Cover 1700x1900, Cat Stop™, Cat Stop™ Flowers x 20, Large Metallic Handgrips x 2, Medium Metallic Handgrips x 2, Bolt Protection Caps, Tympanums x 2, Multi Brackets x 6, Roof Construction Brackets x 4, Roof Triangles 90 x 2, Slide Anchor Piles x 2, Slide Brackets x 2, Solid Floor Brackets Slide x 2, Platform Clamping Plates Bottom x 3, Manuals 1-4, 3D Leveller, Logo ID Plate, Hardware, Toolset, Building Tools

Kit:

1x P-Kit B, 1x P-Kit C

Hy-slide:

1x Green/Steel

Dimension:

4 x 1,9 x 3,9 m

Playground area:

7,4 x 4,6 m

Platform height:

1,5 m

Critical fall height:

1,5 m

Slide length:

3 m

Area:

35 m²

Timber:

0,57 m³

Weight:

311.00 kg

Assembly time by 2 pers.:

6

Type of surface:

All play equipment must be installed over an impact attenuating surface according to the standard EN 1176-1: 2008, properly prepared for use in children’s playgrounds. The following is a list of commonly used impact attenuation material: double shredded bark mulch, uniform wood chips, fine gravel, fine sand, rubber tiles, poured in place impact attenuating surfacing. For placement on grass, check local regulations.

Paved construction site:

For fixation to a paved surface (e.g. with rubber tiles) additional hardware required: e.g. chemical anchors, expanding plugs/bolts.

Non-paved construction site:

For anchoring in a non-paved surface (e.g. grass, sand) additionally required:
Anchors Set Uni: 2 sets 
Concrete: 90 litre (≈180 kg)

Certification

All Hy-land Projects are type-approved and certified by an independent test organization, TüV Rheinland. When Hy-land Projects are built according to the instructions, then each Project complies with EN 1176 : 2008. This is the European standard for playground equipment for public / commercial use. For example for restaurants, hotels, stores, day care centres, sport clubs, camp sites and controlled community areas.

Inspection and maintenance

Hy-land projects do not need additional inspections from a test organization, not after assembly and not throughout the year. All Hy-land projects come with a checklist and logbook. You can legitimately carry out the inspections yourself, that are mandatory for public / commercial playgrounds.

Material information

Robust dimensions of pressure-treated pine - stainless steel ladder rungs - powder coated steel handgrips, roof brackets and swing brackets - triple-coated non-corrosive screws and bolts - reinforced PVC sandbox covers - polyamide bolt covers - galvanized steel swing chains - stainless steel swing hooks with nylon bearing - shock absorbing light weight EPDM polymer swing seats. All materials apply to the strictest European health and safety requirements, are weatherproof and UV-resistant.

Manufacturer:

Hy-land B.V.

Warranty:

2 years